Crawl Space Repair Before & After Photos

In this cobblestone basement, the homeowner noticed the ceiling starting to dip, which caused the upstairs flooring to creak when walking across. In order for us to stabilize and premaritally lift the sagging floor, we installed our SmartJack supplemental galvanized beams with a solid concrete footing. These heavy-duty steel columns are secured to the joist and they can adjust to your custom fit. Our product is designed to stop the area from settling and can lift the sagging floor to its corrected level.

The extremely high moisture levels in this customer's crawlspace had caused significant damage to the center support beam. Here we used existing piers and temporary jacks to lift the floor off the old cracked and rotting beam so we could replace it with new, pressure-treated lumber. Once we replaced the beam, we advised this customer to have a sump system and dehumidifier installed in order to keep the high moisture levels in check.

This customer's crawlspace was wet, moldy and in dire need of attention. We started here by removing the old insulation and doing a full mold remediation. Next, we added Silverglo insulated wall panels around the perimeter of the crawlspace. We then installed our Cleanspace drainage matting and Cleanspace liner, which will provide a barrier against moisture and water intrusion. We also installed a Supersump sump pump system, this system come with a liner, a cast iron pump, a pump stand and an airtight lid with a built-in floor drain and WaterWatch alarm system. Lastly, we installed a Sanidry Sedona dehumidifier to check the humidity levels in check.

For this crawl space in North East, MD, we had to help the customer get rid of the moisture and correct the foundation. Due to the amount of moisture trapped in the crawl space, it started to take a toll on the support beams. To correct the moisture issue, we did an encapsulation with our Clean Space Vapor barrier and installed Smart Pipe with a Smart Pump. We also installed our Silver Glo insulation, new Vent Covers and a Sani Dry Dehumidifier. 

Now for the structural repair, we sistered numerous joists and then added additional support to the support beam with our Smart Jacks, which will not only support the main beam but will level it out as well.

A homeowner in North East, MD noticed their basement window was letting water in and causing damage to the walls. We installed our CleanSpace Vapor Barrier, which is designed to be effective for moisture and vapor seeping in. Our wall system is made out of a white poly sheet material that covers the entire wall, keeping the basement dry from water damage.