Basement Waterproofing Before & After Photos

This Perryville resident had a block foundation and water would seep in during heavy rainfall, causing mold to grow. In the corner, we removed the old sump to install our TripleSafe pump system with a twin liner. This system also includes the UltraSump battery back-up with an alarm system that will keep the basement safe from power outages, a blown circuit or system error.   

In this cement block basement, the owners had heavy water intake due to recent rainfall they were experiencing. The basement didn't have proper waterproofing systems to get out the water it was taking on, which led to our team installing our WaterGuard sub-floor drainage system. We dug out a trench around the perimeter of the foundation that would hold in place the sub-floor drain that connects down into the sump pump system. Once the water channels down the drainage system into the sump, the water is safely pumped out and away from the home. 

This homeowner contacted us due to water seepage on a basement wall that has been getting worse over time. The team went in and installed our CleanSpace Vapor Barrier on the contracted walls around the foundation. The vapor barrier will capture any moisture or wall leakage that comes through and carry it down to our WaterGuard sub-floor drainage system that connects to the sump pump. Now that the water has been removed from the walls, your basement will no longer be wet. 

At this home, the owner was experiencing water intrusion where the wall and floor meet, causing seepage on the floor. We removed the old sump that was no longer pumping out the water coming in and replaced it with our SuperSump pump system, which then connected to our WaterGuard sub-floor drain. This system is installed with a Zoeller M53 cast iron pump and stand with an airtight lid and WaterWatch alarm system. The sump can pump up to 3,900 gallons and has a WaterWatch alarm that sounds off in the event of a pump failure or even a power outage, ensuring the safety of your basement.

In this unfinished basement, water was coming into the home intermittently from both the floor and walls when it would rain. We installed our WaterGuard sub-floor drainage system that will carry the captured water down the drain and into the sump pump system. The team placed our CleanSpace Vapor Barrier around the foundation walls where the water was coming in from which captures the vapor and leakage coming in through the walls. Lastl,y we removed the old sump system and installed our SuperSump pump with Zoeller M53 cast iron pump that will pump up to 3,900 gallons of water. With this system install the basement will no longer be damp with humidity or odors and this creates a new dry space.