Foundation Repair Before & After Photos

A Warminster, PA homeowner noticed the first level of their home was sinking, so they contacted Quality 1st Basement Systems for an estimate. We took a look at the problem and discovered the crawl space beams, that supported the floors, where rotting and needed an extra support system. As a solution, our crew installed the SmartJack Crawl Space Support System to help stabilize the beams and support the floor. Since the installation, the homeowner has not experienced any other floor issues in their home.

This homeowner in Belvidere, New Jersey noticed their walls were cracking and starting to bow inwards. This happens because loose soil after construction creates an active wedge where water can easily flow into it, and create hydrostatic pressure. The homeowner contacted Quality 1st Basement Systems and our System Design Specialist, Jay Alvarez, suggested they use a non-invasive solution to permanently stabilize the walls. Our foreman used the CarbonArmor System which is flexible carbon fiber fabric straps. The fiber straps are bonded to the inner face of the wall to stabilize it.

A homeowner in Hampton, New Jersey had a bowing foundation wall and contacted Quality 1st for a solution. Our System Design Specialist inspected the walls and noticed the bowing. He suggested CarbonArmor be installed on the walls to stabilize them. CarbonArmor is made from reinforced polymer strips that are 10 times stronger than steel. The straps are attached to the wall and secured with heavy duty steel brackets and pull the wall back to its original position. CarbonArmor installs quickly and will not impact future basement finishing. 

Your Foundation can undergo serious foundation issues when the soil around the home becomes too wet or too dry. The soil will cause the home to move, sink and settling creating stress on the foundation resulting in cracks. Quality 1st Basement Systems has solutions that are long-lasting, durable, and permanently stabilize the foundation. If you are experiencing foundation inside or outside your home, contact us and schedule a free estimate! 

This homeowner in Blairstown, New Jersey noticed their basement wall was cracking and bowing inwards. They contacted Quality 1st Basement Systems and our foreman, Wilver Cardoza installed the CarbonArmor Wall Reinforcement System which is made from a fiber-reinforced polymer with a high-strength epoxy resin. This system provides the ultimate stabilizing of the wall. There are brackets above that allow the system to be adjusted to bring the wall back towards its original position.