Crawl Space Repair Before & After Photos

Looking at the before picture you can see that this Lake Cuomo homeowner was experiencing sagging floors and cracks in the walls from foundation failure in the crawl space. The bricks could barely hold the beams up and so the homeowner decided to contact Quality 1st Basement Systems. 

System Design Specialist, Ken Peare, recommended our Crawl Space Support System. This consisted of SmartJack Stabilizer which is a supplemental support system used for sagging crawl spaces. It not only provides support for the failing structure but often will lift the failing floor beams back to their original state. 

The homeowners were relieved to find a company that could provide them with the best solution possible.  

Quality 1st Basement Systems was hired to waterproof this basement in West Nyack, NY. Our crew installed the WaterGuard French Drain, SmartSump Pump System, and CleanSpace Moisture Barrier as the best solution. Since the installation, the homeowner has not experienced any other water issues in their basement. 

The homeowners of a crawl space in Normandy Beach, NJ wanted an encapsulation system installed. They were dealing with high humidity and moisture.

First, drainage matting was installed on the crawl space floor to help direct water to the sump pump. Drainage matting has raised dimples to give the water a channel underneath the crawl space liner. CleanSpace was installed on the crawl space walls and floors to keep water vapor and humidity from passing through. CleanSpace also gives the crawl space a bright and clean look and will not rip or tear. CleanSpace is the perfect solution for crawl space encapsulation and making sure the crawl space can be used for storage. 

Quality 1st Basement Systems provided a solution for this musty crawl space in Sea Girt, New Jersey. We installed our CleanSpace Vapor Barrier System to prevent the outside elements from entering the crawl space. The moisture vapor barrier will stop water and moisture from passing through the foundation walls. This will keep the area dry and promote better quality air throughout the crawl space. 

This homeowner from Belmar, NJ was noticing moisture in their crawl space. They called Quality 1st Basements for a free estimate. One of our System Design Specialists did a thorough inspection and put together a solution based on the homeowner's problems. 

The crawl space was entirely encapsulated in CleanSpace Vapor Barrier to seal out any moisture, humidity, and odors. SaniDry Sedona was placed in the crawl space to dry the air of any humidity. Finally, a vent cover was installed at the opening of the crawl space to seal out any harsh weather and debris from affecting the crawl space.

The homeowner now had peace of mind that their crawl space was nice and dry.