Concrete Lifting and Leveling Before & After Photos

This homeowner in Clark, New Jersey noticed their concrete patio was unlevel and becoming a safety hazard. If this goes without repair, someone could trip and severely injure themselves. They contacted Quality 1st Basement Systems where our System Design Specialist, Alvin Reed, provided an inspection. Alvin suggested they use polyurethane foam to bring the concrete to a level position. Our foreman, Ramon Romero, used PolyLevel Injections to be injected underneath the slab and into the voids. Within 20 minutes, the concrete was brought to a lifted position, and it was safe to walk on again!

A homeowner in Clark, NJ was interested in repairing their sinking concrete patio, so they contacted Quality 1st Basement Systems. Our System Design Specialist, Alvin R., inspected the patio and measured how far the concrete had sunk. He then recommended the Polylevel Injection would be the perfect repair method. Polylevel is waterproof, environmentally friendly, and takes fifteen minutes to heal. The installation is quick and does not disrupt the landscape of the home. After our poly level crew did a final cleanup, the patio was repaired, and the homeowner was very happy with the outcome!

Quality 1st Basement Systems helped this home prepare for summer swimming with PolyLevel. The team injected PolyLevel underneath the concrete, lifting it up into place. This Fairfield, NJ pool patio is now even and no longer a dangerous trip hazard.

The sidewalks in front of this Ringwood, NJ home had severely sunken concrete slabs. Quality 1st Basement Systems installed PolyLEVEL concrete leveling system to raise the slabs back to the correct position. PolyLEVEL is a two part foam which was injected underneath the concrete slabs to fill the void underneath the sidewalk and ensure that the slabs will not sink again.

This Ringwood, NJ pool deck was sinking and settling. The way the concrete had settled made it dangerous to walk around the perimeter of the pool because the edge of the concrete was easy to trip on. Quality 1st Basements lifted the concrete back to its original position with PolyLevel. The polyurethane foam was injected beneath the slab through the penny sized holes that were drilled into the concrete. Once the foam was injected it began to expand and fill the void, raising the concrete back to level.