Basement Waterproofing Before & After Photos

At this church property in Baltimore, MD, the bathroom had a deep foundation wall crack that needed to be sealed. We sent our crew member to inspect the foundation wall and inject the crack with our Polyurethane Injection. After that, we followed up with our FlexiSpan Wall Crack repair, which is compatible with our WaterGuard sub-floor drain system. This will carry any moisture to the sump pump that gets captured off the wall.

In this dirt floor crawl space, the homeowners used a vapor barrier to try and keep the moisture down, but now there are signs of mold growth. We installed our SaniDry Sedona dehumidifier, which is designed to keep the humidity low, eliminate that muggy feeling and stop the growth of mold. The SaniDry prevents the growth of indoor allergens such as dust mites and is powerful enough to keep the home below 55% relative humidity.

At this Baltimore row home in a partially finished basement, the owner was seeing water intrusion through a shared wall and the area was getting more humid. We went out to the property to install our WaterGuard sub-floor drainage system that will capture any leakage from the wall. This system will pump the water into the sump pump system that will safely keep it away from the walls. Then we trimmed the wall back in order to install our CleanSpace Vapor barrier, which is an effective waterproofing system and captures any moisture seeping in, keeping the basement dry.

In this unfinished basement in Baltimore, MD, the homeowner was seeing water coming into the home through the floor when it would rain. We dug a trench along the sewage line to install our WaterGuard sub-floor drain that will carry the captured floor water down into the sump pump system. We then installed our CleanSpace Vapor Barrier along the walls of the foundation that will capture any water or moisture that seeps in through the leaky walls. This system will prevent water from coming into the home and will keep the moisture under control.

In this dental office in Baltimore, MD, the unfinished foundation walls were leaking, crumbling, and collecting water on the basement floor. In order for us to capture the moisture coming in, we installed our CleanSpace Wall Vapor Barrier System, which is designed to reduce moisture and water seepage. We also installed below grade our WaterGuard floor drain, which will carry the water down into the sump pump system, keeping the space dry and moisture-free.