Crawl Space Repair Before & After Photos

This Nottingham, MD homeowner had been battling persistent water intrusion in their crawl space, which led to damp, uncomfortable conditions and growing concerns about mold, structural damage, and energy loss. Seeking a permanent solution, they turned to Quality 1st Basement Systems.

After a thorough inspection, our team designed a customized waterproofing and encapsulation plan tailored to the home’s specific needs. We installed SilverGlo Insulation Panels to boost energy efficiency and resist moisture, lined the crawl space with our CleanSpace Vapor Barrier System to seal out humidity and prevent mold growth, and added our IceGuard Discharge Line to ensure reliable drainage even in freezing conditions. To complete the system, we replaced the crawl space entry with our durable, maintenance-free EverLast Door, which keeps out pests, moisture, and outdoor air.

With these proven solutions in place, this homeowner can now enjoy a dry, healthy, and worry-free crawl space for many years to come!

At this Pasadena home, the crawl space was getting filled with water during rainfall. We sent a team out to install our crawl space encapsulation system with a Drainage Matting that lies under the CleanSpace liner. The durable liner is a 20mil thick, 7 layer polyethylene composition that is reinforced with polyester cord. This system will help seal out cold drafts and it helps reduce moisture in the air, keeping the humidity low. 

This crawl space was damp and water would seep in through the block walls and down to the dirt floor. We came out and installed a Cleanspace Vapor barrier, Drainage Matting, Silver Glo insulation and a SaniDry CX Dehumidifier.

We were called regarding high moisture in this dirt crawl space, and the homeowners wanted to look into sealing it at some point. Our team removed, hauled and of all the old damp insulation from the crawl space to make room for the liner. We installed our CleanSpace Encapsulation system to address the crawl space problems and to cut down on the vapor that seeps in through the dirt floor. Lastly, we surrounded the perimeter walls with our SilverGlo insulated wall panels to keep a dry and energy crawl space.

In Dundalk, MD, a homeowner began experiencing ongoing moisture problems in their crawl space, which led to concerns about mold development, musty odors, and the potential for long-term structural damage. The damp conditions were not only affecting the comfort of their home but also posed a serious risk to its health and stability. Wanting to address the issue before it worsened, the homeowner contacted Quality 1st for a professional and lasting solution.

After conducting a thorough inspection, our team determined that the crawl space lacked a proper barrier to prevent moisture from rising through the soil. To resolve the problem, we installed our CleanSpace Vapor Barrier System, a heavy-duty, reinforced liner designed to completely seal off the crawl space from the damp ground below. Our crew carefully prepared the space, secured the barrier to the walls and floor, and ensured all seams were tightly sealed. This installation successfully eliminated ongoing seepage, reduced humidity, and transformed the crawl space into a dry, clean, and healthy part of the home, bringing the homeowner peace of mind and long-term protection.