Concrete Lifting and Leveling Before & After Photos

This homeowner in Pennsville, New Jersey noticed their pool patio was beginning to sink and become unlevel. This happens because the soil underneath the concrete is poorly compacted. Over time, this soil settles and creates voids underneath the concrete. The homeowner contacted Quality 1st Basement Systems and our System Design Specialist, Chris Bowe, provided an inspection and suggested they use polyurethane foam. Our foreman, Ramon Romero, began installing our PolyLevel Injection System. This is done by drilling tiny holes into the concrete and injecting the foam into the voids underneath. PolyLevel has expanding properties that allow for accurate lifting and leveling of the slab. Now, the homeowner doesn't have to worry about tripping near their home!

A homeowner in Pennsville, NJ was interested in repairing their pool patio, before closing it for the summer, so they contacted Quality 1st Basement Systems. Our System Design Specialist, Chris B., provided a thorough inspection and measured how far the concrete had sunk. After finding the concrete had sunk a little over two inches, Chris recommended the patio be repaired using the Polylevel Injection Method. Polylevel is a durable and long-lasting solution to concrete repair. It's waterproof, environmentally friendly, and takes fifteen minutes to recover. After the repair, the homeowner was relieved that they no longer had to worry about tripping hazards!

Quality 1st Basement Systems was contacted by this homeowner in Pennsville, New Jersey due to their concrete walkway sinking and settling. We sent our System Design Specialist, Chris Bowe to inspect the concrete. He suggested we use polyurethane foam to lift and level the slab. Our foreman Ramon arrived at the home and used our PolyLevel Injections. PolyLevel has expanding properties that allow the concrete to become raised. Within 20 minutes, the job was complete! The homeowner was satisfied with the results and they didn't have to worry about tripping hazards anymore! 

Injection of PolyLevel foam beneath a sinking sidewalk slab helps to fill the voids beneath  and lift the slab. Foreman Nick Boldman and his crew completed this installation for this customer to eliminate the trip hazard.

This driveway was uneven, and had large cracks throughout the surface, as you can see in the "before" photo. Our team swooped in to use our PolyLevel injection system. PolyLevel injected beneath the sunken slab raises it to its original level. Additionally, the cracks were sealed to seamlessly blend the concrete once more!