Concrete Lifting and Leveling Before & After Photos

Check out this pool deck repair we did in Stafford, NJ. The homeowner noticed the concrete slabs around the pool had become uneven creating small gaps in between the joints. Our System Design Specialist, Jay Alverez, fully inspected the area and recommended lifting the slabs with our concrete raising system, PolyLevel. Raising the slabs back to level to remove the gaps between the joints. 

A homeowner in Ramsey, New Jersey had a sidewalk in front of their home that was sinking 4-6 inches and needed to raised. The homeowners contacted Quality 1st for a solution. Quality 1st had PolyLevel installed to raise the concrete back to its original position. PolyLevel is a polyurethane foam that is injected into the concrete through specialized equipment that starts raising the concrete within minutes. The concrete is ready to use that very same day! PolyLevel is a fast and easy solution to concrete lifting and leveling.   

This concrete and slate patio in Ramsey, NJ was sinking, causting it to separate from the home. Quality 1st Basements injected Polylevel, a foam that expanded under the sunken slabs and filled all the voids in the slab, while pushing it up and securing it. The joints around the perimeter of the patio were then sealed to ensure that water would no longer seep through and cause the soil beneath the patio to erode. 

A Ramesy, NJ homeowner contacted Quality 1st Basements for a concrete lifting solution after they noticing slabs around their pool had settled causing an eyesore. Concrete Repair Specialist, Jeff Pitek, measured roughly 2 inches of settlement around the entire pool area. The homeowner wanted to raise the slabs to remove the eyesore and trip hazards and make sure they would never sink again. Thanks to Jeff and our PolyLevel Foreman Richard, Quality 1st was able to completely level the entire pool deck area, removing the trip hazard while permanently stabilizing the concrete to prevent future sinking and settling.   

Polylevel is a foam that lifts and levels a sinking concrete slab back to its original state. Many homeowners will either replace that sinking slab but once this is done that slab no color is the same color as the rest of the concrete. By using PolyLevel, the existing concrete slab is lifted and stabilized to prevent future sinking or settling.