Basement Waterproofing Before & After Photos

This was a partially finished basement, and the ground would get saturated during rainstorms. We removed the old pump and installed our SuperSump sealed pump system that is strong, reliable and can pump out 2,280 gallons per hour. Our SuperSump features a built-in alarm system that indicates when water levels get high, an airtight lid that keeps any moisture or debris out, and has a floor drain, allowing water to drain into the pump. 

Water was always getting into this customer's basement, and in some areas, they had standing water year-round. Our solution to this problem was to install a Cleanspace vapor barrier, WaterGuard, SuperSump Pump, and a battery backup.

A homeowner in Port Deposit, MD, began noticing increasing water intrusion in their basement, primarily due to an old window that allowed moisture to seep in, creating damp conditions and musty odors. Concerned about potential mold growth and structural damage, they reached out to Quality 1st for a lasting solution.

After a thorough inspection, our team developed a tailored waterproofing plan to address the root cause of the problem. We installed our patented WaterGuard Drainage System to efficiently manage water flow, paired with our TripleSafe Sump Pump to ensure reliable water removal. To eliminate the source of moisture, we replaced the old window with an energy-efficient EverLast Window, and added our SunHouse Window Well Enclosure to protect the area from debris and water accumulation.

With these advanced solutions in place, we successfully restored the basement to a dry, healthy environment, providing the homeowner with peace of mind against further water seepage issues!

In this damp basement in Port Deposit, MD the cement walls were leaking with moisture and then over time sitting on the floor of the basement. We dug a trench along the perimeter of the floor where the moisture was coming in, to install our WaterGuard French Drain. This drain system will collect the water from the floor joint, redirect it to the sump chamber, and safely pumps out the water.

Customer had a few cracks along the basement wall and when it would rain, water would seep in through the cracks. To take care of this, we used our patented product called FlexiSpan. Flexispan is a 2 part system, a crack sealant and a hidden drainage channel that directs any leaking water to your sump pump. The drainage channel is permanently sealed to the foundation, and if there is any wall movement, the channel will flex with it.