Quality 1st Basement Systems Before & After Photos

When they noticed their basement wall was cracked and bowing, this homeowner contacted Quality 1st Basements for a solution. Our senior Design Specialist, Ken P., provided the homeowner with a designed solution that best fit the needs of this homes foundation. This  included the installation of the CarbonArmor System. Wilver, our project Foreman, and his team headed out to the site and installed Our Reinforcement Wall System.

The walls are now completely stabilized and the homeowner no longer has to worry about their basement wall caving in. This system provides the ultimate solution since it will now prevent future movement, it can be adjusted to gradually pull the wall back towards its originally position and finally it can be covered if the homeowner decides to finish their basement. 

This sidewalk in Bridgewater, NJ had three slabs that were sinking and settling about 3 inches into the ground. Quality 1st Basement injected PolyLevel underneath the slab and lifted it back into place. PolyLevel sets in just 15 minutes and is a cheaper option than replacing concrete. 

This homeowner from Bridgewater, NJ had settled concrete in their walkway that needed to be lifted. Quality 1st Basements used PolyLevel to lift the slabs back to their original position so that it was level and safe to walk on. 

A homeowner in Bridgewater, NJ, was experiencing horizontal cracks all over the wall. Moisture and frost, interact with the soil around the home and then cause the soil to expand. That expansion results in constant inward force on the foundation wall until it can no longer support the pressure, causing cracking, bowing, and tipping.

Senior Foundation Foreman, Jonathan Neira, arrived at the job site and started to sand down the area where the Carbon Armor strips were going to be placed. Team members then saturated the Carbon Armor Straps with epoxy resin and placed it on the affected area. The strap is 10 times stronger than steel therefore gave this homeowner a piece of mind.

The foundation walls in this Bridgewater, NJ home were bowing and beginning to crack. The homeowner knew that something had to be done to stabilize the walls, so they contacted Quality 1st Basements. System Design Specialist, Ken P. went to inspect the home and suggested that the homeowner have Carbon Armor installed. The CarbonArmor System is the perfect solution for bowing and cracked walls. The material used to create the product is the same technology that the Army Corps Engineers developed to reinforce bomb shelter, skyscrapers & bridges. The flexible carbon fabric straps are up to 10x stronger than steel. The installation is quick and requires no excavation. A huge benefit of having CarbonArmor installed rather than steel beams is its compact nature. They can easily be painted over and won't impact basement finishing.