Quality 1st Basement Systems Before & After Photos

This Rocky Hill, NJ pool needed to be fixed before next summer, so the homeowner called Quality 1st Basement Systems into inject PolyLEVEL underneath the sinking concrete. The slabs were raised and now this pool patio is level and looking great!

A homeowner in Rocky Hill, NJ had bowing basement walls. Quality 1st Basement Systems stabilized the foundation with CarbonArmor wall strips.

This homeowner in Mine Hill, New Jersey noticed their concrete patio was cracking and becoming unlevel. If this goes without repair, it could cause a tripping hazard and someone could injure themselves. The homeowner contacted Quality 1st Basement Systems and our System Design Specialist, Joseph DelVecchio provided a thorough inspection and suggested they use polyurethane foam. Our foreman, Ramon began using our PolyLevel Injections by drilling small holes into the concrete and injecting the foam underneath the slab. This causes the concrete slab to rise to a level position. When the job was complete, the homeowner was happy with the results. They were able to safely walk on their patio without the concern of tripping! 

This basement was anything but cozy with cold, damp cement floors. Quality 1st Basement Systems installed ThermalDry flooring in this basement to create a more inviting atmosphere. ThermalDry uses modular tiles raised on pegs that prevent cold air and moisture from seeping through, ensuring floors always stay warm and dry!

The concrete floors of this crawl space in Bridgewater, NJ was causing cold floors on the first floor of the home during the winter. During the summer, the pourous concrete allowed moisture to enter the crawl space and the rest of the home. Quality 1st Basement Systems installed SilverGlo crawl space insulation and CleanSpace crawl space encapsulation system to insulate and seal off the crawl space from the damp, cold earth.