Quality 1st Basement Systems Before & After Photos

This homeowner contacted Quality 1st Basement Systems when they realized the front walkway of their Bayville, NJ home was sinking by the front door. The settlement was an eyesore and the homeowner wanted it fixed right away. The Q1 team injected PolyLevel foam underneath the slab immediately raising it back to level while removing the eyesore. The homeowner was thrilled to see that the job did not affect them reentering the home as soon as the job was done.

A concrete patio at a home located in Berkeley Township had began to sink causing 2 inches of settlement. Now that summer is here and everyone would be using the patio, the homeowners wanted the concreted raised right away so that their furniture could be brought out. Quality 1st Basement Systems was able to lift and level the concrete slab and within 15 minutes of the raising, the homeowners were able to put their furniture out and use their patio. Now they can enjoy their patio knowing that it is stabilized and safe for the family. 

A homeowner living in Berkeley Township had noticed a musty smell in their crawlspace and the odor had risen into their first level of their home. This is known as the Stack Effect.   With the family now breathing in that air, the homeowner wanted to remove this musty odor from their crawl space right away. System Design Specialist, Joe Hubbard, inspected the crawl space and devised a solution. Jeffery suggested CleanSpace for it will seal the area off from water, moisture and anything else that could cause a musty odor. Cleanspace is a Vapor Barrier System that provides permanent moisture control and protection for any size crawlspace. Project Manager, Wilver Cardoza and his crew installed the Cleanspace to the floors and walls to eliminate the musty odor, creating a dry and healthy environment. 

A homeowner in Berkeley Township, New Jersey noticed their landing had settled 2 inches. At the end of the driveway there were puddles of water collecting in the settlement. The homeowners contacted Quality 1st for a solution.

Our crew used PolyLevel, a polyurethane foam to lift the concrete back to its original position. To do this, the foam was injected into the concrete through penny-size holes. After 30 minutes, the foam begins to harden and raise the concrete. This PolyLevel method is fast, easy, and permanent.   

To seal this crawl space from water seepage, mold, moisture and other harmful things that could potentially negatively effect this crawl space and structure of this home, Quality 1st Basements installed our Moisture Vapor Barrier known as CleanSpace.