Wall Cracks
Due to ongoing foundation settlement, the basement walls began to exhibit visible signs of cracking, bowing, and structural deterioration. These compromised areas created openings that allowed a progressively larger volume of moisture to seep into the basement, contributing to elevated humidity levels, potential mold growth, and further weakening of the wall structure over time.
Installing EverBrace
We installed our EverBrace Wall Restoration System by first assessing the damaged foundation walls to determine structural needs. Next, the crew secured steel beams to the floor and ceiling joists, anchoring them with heavy-duty brackets. After precise alignment, the beams were reinforced with steel panels that distribute pressure evenly, stabilizing and supporting failing walls.
During SilverGlo Install
The crew added our SilverGlo Insulation Panels by first preparing the basement walls, cleaning and smoothing surfaces to ensure a secure fit. Each panel, made of high-performance graphite-infused foam, was custom-cut and tightly fitted against the wall to minimize air gaps. We then sealed all edges and seams with specialized tape and spray foam to create a continuous thermal barrier.
Installing TripleSafe
To begin the TripleSafe Sump Pump installation, our crew started by carefully excavating a sump pit at the lowest point of the basement to collect groundwater efficiently. We then installed the TripleSafe liner and placed the three-pump system inside: a primary pump for regular use, a secondary for backup, and a battery-powered pump for power outages. Once secured, we connected the discharge line, sealed the pit with an airtight lid, and tested the system to ensure reliable, protection.
During WaterGuard Install
To install the WaterGuard Drainage System, our crew began by removing a section of the basement floor along the perimeter walls. We then cleared out soil and debris to make room for the drainage channel, which we placed just above the footing to prevent clogging. After connecting the system to the sump pump, we covered it with clean stone and restored the concrete floor for a seamless finish.
TripleSafe Sump Pump
The TripleSafe Sump Pump System provides unmatched protection against basement flooding with its triple-layer defense. It includes a primary pump for everyday needs, a secondary pump for heavy water flow, and a battery backup pump that kicks in during power outages. This smart, redundant design ensures your basement stays dry, no matter the conditions.
WaterGuard Drainage System
WaterGuard offers a reliable, clog-resistant solution for keeping basements dry. Installed just above the footing, it captures water seepage from walls and the floor joint before it reaches your basement interior. Unlike traditional drains, WaterGuard stays clear of mud and debris, ensuring long-term performance.
EverBrace
The EverBrace Wall Restoration System is the ideal solution for severely deteriorating foundation walls. Unlike traditional methods, it combines the strength of steel I-beams with rigid steel panels and dense foam to fully support and stabilize failing walls, without the need for full replacement. It transfers the load from compromised walls to the new bracing system, restoring structural integrity while also resisting further inward movement.
Stable And Strong
Thanks to the installation of our powerful repair systems, including the EverBrace Wall Restoration, TripleSafe Sump Pump, and WaterGuard Drainage System, this homeowner's basement is now fully stabilized, protected from water intrusion, and built to last for years to come. A safer, stronger home starts below the surface!
