Mold Problems Before & After Photos

Customer called in regarding a dirt floor crawlspace with mold issues. We started with removal of old insulation and debris then used a Mold-X2 cleaner and Biotanical. We installed CleanSpace crawl space encapsulation system with CleanSpace Drainage Matting under the liner. To keep the humidity low in crawl space we used the SaniDry Sedona and added RimTight Spray foam with our EverLast Door. 

In this Middletown, DE home, the unfinished basement had mold spots along the joist and needed mold treatment. We sent out our crew to look at the rim joists that have mold spots, then sprayed our Mold-X2 Cleaner with Botanical, which will benefit the aggressiveness and the amount of mold that is there. With this treatment, it will help prevent mold from recurring and will keep a healthy home mold-free.  

Jay Hugee, System Design Specialist for Quality 1st Basements, found that this customer had a problem with moisture beneath the insulation sitting between the floor joists. Trapped moisture on organic material (such as the wood) leads to mold growth and decay. To remedy this problem for the customer, foreman Luis Aguirre and his crew removed the insulation and sprayed Mold-X 2-part Botanical cleaner on the floor joists and left the insulation out so the air could dry out the moisture in an area where mold growth has potential.

This Atlantic Highlands homeowner had a leaky basement which caused black mold to grow on his basement walls. Quality 1st Basement Systems installed a full perimeter WaterGuard system with a SuperSump sump pump to waterproof the basement. EverLast wall panels were then installed to refinish the basement. EverLast is not made of organic materials so it will never grow mold!