Atlantic, NJ Dependable Basement Waterproofing Contractors

A homeowner in Egg Harbor City, NJ knew their concrete porch was sinking, so they decided it was time to have it repaired. They contacted Quality 1st Basement Systems and scheduled an appointment for a system design specialist to inspect the porch and provide them with a quote. We scheduled the appointment for our System Design Specialist, Chris Bowe.

Chris arrived at the home, on time, and inspected the concrete porch. Afterward, Chris presented his findings to the homeowner and suggested the Polylevel Injection would be the best repair method. The homeowner agreed and another appointment was scheduled for our crew to come and repair the porch. 

Our foreman, Sean Johnson, arrived with the rest of our crew and proceeded to repair the driveway. First, they drilled small, penny-like holes into the uneven concrete slabs. Next, our crew injected the polylevel foam into the void using specialized equipment. Once the void has been filled, the foam expands and lifts the concrete to the desired height. Our crew repeated the process until the porch has been repaired. 

In conclusion, the repair project was a success. Our crew did not have any issues with the repair, and the homeowner was very happy with the results. The porch is fully set and glowing with its new look!

A homeowner in Egg Harbor, NJ contacted Quality 1st Basement Systems after discovering a part of their pool deck was sinking two inches. Sinking concrete doesn't just provide an unclean look for your home, but it can also decrease your home's property value and create tripping hazards for yourself. 

After speaking with our customer service representative, the homeowner scheduled an appointment with our System Design Specialist, Chris Bowe. Chris carefully inspected the pool deck and discovered multiple concrete slabs sinking, as well as cracking in the middle of the deck. Chris presented this to the homeowner and recommended our Polylevel Injection and NexusPro Joint Sealant would be the best repair solution. 

Polylevel is a better, and more durable solution that provides a long-lasting solution for you and your home. Unlike mudjacking, polylevel is not a mixture of mud and concrete but rather a foam made from structural graded polymers. The best part about polylevel is that heals within fifteen minutes, so you will never have to wait days to walk on your new concrete. 

In conclusion, the repair project was a success. Our crew did not have any issues with repairing the pool deck, and the homeowner was very happy to see their pool deck fully set and ready for action! 

This homeowner in Egg Harbor Township, New Jersey noticed their concrete walkway was sinking and settling. This occurs when concrete is poured over poorly backfilled soil. Over time, this soil settles and creates voids underneath, causing it to become unlevel. If this goes without repair, it could cause someone to injure themselves and cause tripping hazards.

The homeowner made a call to Quality 1st Basement Systems where our customer service representative booked them an appointment with our System Design Specialist, Chris Bowe. Chris provided a thorough inspection and suggested they use polyurethane foam to lift and level the concrete. 

A few days later, our foreman arrived at the home and began the process of using our PolyLevel Injections. This is done by drilling small, penny-sized holes into the concrete and injecting the foam underneath the slab. This will cause the concrete to be brought to a lifted position, and this process is repeated until its brought to the desired height. PolyLevel is a lightweight and environmentally friendly solution that will not add any weight to the existing soil.

When the job was complete, the homeowner was satisfied with the results. They were able to safely walk on their concrete without the concern of tripping hazards!

This homeowner in Milmay, New Jersey noticed their concrete sidewalk was sinking and becoming unlevel. This can occur because of soil erosion underneath the slab. As water runs down through the cracks and joints in the concrete, it washes the soil out as it passes through. These voids cause the concrete to shift and settle, and this creates dangerous tripping hazards! 

The homeowner didn't want this issue to go without repair, so they searched the internet for solutions. They came across Quality 1st Basement Systems and they gave us a call. Our customer care representative booked them an appointment with our System Design Specialist, Chris Bowe. Chris provided a thorough inspection and suggested they use polyurethane foam to lift and level the concrete. 

A few days later, our foreman arrived at the home and began the process of using our PolyLevel Injections. This method is done by drilling small, penny-sized holes into the concrete and injecting the foam into the voids underneath. This process is repeated until the concrete is brought to a raised position. PolyLevel is a lightweight and environmentally friendly solution that will not add any weight to the existing soil.

When the job was complete, the homeowner was satisfied with the results. They were able to safely walk on their concrete without the concern of tripping hazards! 

This homeowner in Galloway, New Jersey noticed their concrete patio was sinking and becoming unlevel. This can happen because of soil erosion under the slab. As water runs down through the cracks and joints in the concrete, it washes the soil out as it passes through. These voids cause your concrete to shift and settle, which also creates dangerous tripping hazards. If this goes without repair, someone could get injured! 

The homeowner did not want this issue to go without repair, so they searched the internet for solutions. They came across Quality 1st Basement Systems and our customer care representative booked them an appointment with our System Design Specialist, Chris Bowe. Chris provided a thorough inspection and suggested they use polyurethane foam to lift and level the concrete.

A few days later, our foreman Juan arrived at the home and began the process of using our PolyLevel Injections. This is done by drilling small, penny-sized holes into the concrete and injecting the foam into the voids underneath. This process is repeated until the concrete is brought to a raised position. 

When the job was complete, the homeowner was satisfied with the results. They were able to safely walk on their patio without the concern of tripping hazards. 

This homeowner in Milmay, New Jersey noticed their concrete porch was sinking and settling. This can occur when concrete is poured over poorly backfilled soil. Over time, this soil settles and creates voids underneath, causing the concrete to become uneven. If this goes without repair, someone could trip and injure themselves.

The homeowner did not want this to go without repair, so they searched the internet for solutions. They found Quality 1st Basement Systems and gave us a call. Our customer care representative booked them an appointment with our System Design Specialist, Chris Bowe. Chris provided a thorough inspection and suggested they use polyurethane foam to lift and level the concrete.

A few days later, our foreman arrived at the home and began the process of using our PolyLevel Injections. This is done by drilling small holes into the concrete and injecting the foam into the voids underneath. This process is repeated until the concrete is brought to a raised position. 

When the job was complete, the homeowner was happy to see their concrete was raised and level. Now, they didn't have to worry about tripping hazards anymore! 

This homeowner in Egg Harbor Township, New Jersey noticed their concrete sidewalk was sinking and settling. This can occur from soil erosion under the slab. As water runs through the cracks in the concrete, it washes the soil out as it passes through. These voids cause the concrete to shift and settle. If this goes without repair, this can create dangerous tripping hazards.

The homeowner did not want this issue to go without repair, so they searched the internet for solutions. They came across Quality 1st Basement Systems and they gave us a call. Our customer care representative booked them an appointment with our System Design Specialist, Chris Bowe. Chris provided a thorough inspection and suggested they use polyurethane foam to lift and level the concrete.

A few days later, our foreman arrived at the home and began the process of using our PolyLevel Injections. This is done by drilling small, penny-sized holes into the concrete and injecting the foam into the voids underneath. This process is repeated until the concrete is brought to a level position. PolyLevel is a lightweight and environmentally friendly solution that will not add any weight to the existing soil. 

When the job was complete, the homeowner was happy to see their concrete was raised and level. They did not have to worry about dangerous tripping hazards anymore! 

A homeowner in Mays Landing, NJ noticed their concrete was sinking and becoming unlevel. This happens when concrete is poured over poorly backfilled soil. Over time, the soil creates cracks and voids underneath the concrete, causing it to become unlevel.

The homeowner knew they needed a solution, so they called Quality 1st Basement Systems. Our System Design Specialist Joe suggested using polyurethane foam to lift and level the concrete.

Our foreman and crew used our PolyLevel Injections which is done by drilling small, penny-sized holes into the concrete and injecting the foam into the voids underneath.

When the job was complete, the homeowner was satisfied with the results and they didn't have to worry about tripping hazards! 

A homeowner in Dorothy, NJ noticed their concrete driveway was sinking and becoming unlevel. This can happen from concrete being poured over poorly backfilled soil. The homeowner knew if this went without repair, it could cause tripping hazards.

The homeowner called Quality 1st Basement Systems and we sent our System Design Specialist Joe to provide an inspection. Joe suggested they used polyurethane foam to lift and level the concrete.

Our foreman and crew used our PolyLevel Injections which will bring the concrete to a raised and level position. This is done by drilling small, penny-sized holes into the concrete and injecting the foam into the voids underneath. PolyLevel is a lightweight, environmentally friendly solution that will not add any weight to the existing soil.

When the job was complete, the homeowner was satisfied with the results and they didn't have to worry about tripping hazards. 

Am Egg Harbor City, NJ homeowner was interested in installing a crawl space moisture barrier for the winter season. They knew a moisture barrier would be able to keep their crawl space dry and healthy all year round. They asked their neighbors for recommendations and were referred to Quality 1st Basement Systems. 

As a solution, Quality 1st Basement Systems installed the CleanSpace Vapor Barrier System, which prevents water vapor and humidity from passing through the crawl space. A benefit of installing CleanSpace is the bright-white and clean look it provides the crawl space. 

A few weeks later, our crew arrived at the home and installed the moisture barrier. They were happy with the final results!

A homeowner in Milmay, NJ noticed water seepage in their basement. A damp basement can cause many issues such as rotting wood, increased energy bills, and even mold growth! They knew this needed to be repaired, so they contacted Quality 1st Basement Systems. 

We sent our system design specialist to provide an inspection and they suggested waterproofing the basement.

Our foreman and crew installed our TripleSafe Sump Pump System and WaterGuard French Drain System. TripleSafe will provide three levels of protection against water intrusion and WaterGuard will catch any water that seeps in from the walls and floors.

When the job was complete, the homeowner was satisfied with the results, and their peace of mind was restored!